Tenrod Australia Pty Ltd - Australian distributor of electronic components,catalog online! Wide selection at competetive prices

Solid-state ecoled tube

ecofriendlier alternative to fluorescent tubes

ecoLED Tubes for an environmentally friendly replacement for the T8 fluorescent lamp

Tenrod's solid state LED Tube is an environmentally friendly replacement for T8 fluorescent tube - for new or retrofit installations. The light source is from high efficiency & high brightness LEDs. It is energy saving with half power consumption of fluorescent tubes. It is mercury free; unlike the fluorescent tube with its toxic contents. Also its circuitries are Lead-free & compliant to RoHS (Reduction of Hazardous Substances) requirements. Made from aluminium and poly carbonate, it is more durable and safer to handle. Its LED Lighting is flicker free, unlike that of fluorescent lamps whose strobing lights can be cause mental fatigue or distress for some. It can be easily retrofitted into existing battens and so saves the costs of installing new fittings. It's the light to take you into the future. It has C-Tick approval for use in Australia i& New Zealand.

Why Change to the ecoLED Tube from fluorescent tubes?

Half the power of fluorescent tubes; saves power costs
18W for 4-ft (1200mm) & 9W for 2 ft (600mm)
Mercury free; no toxic spills to contaminate your workplace or environment
No toxic disposals into the environment; Lead-free & RoHS complaint
C-Tick approved for Australia & New Zealand
Steady light, no strobing, no flicker, no buzzing
Robust construction, no breakages when dropped
Long Life - 50,000 Hours Life Expectancy
No starter maintenance; no nuisance of starter failures
Fits standard T8 battens. Can install into existing light fittings (no new fitting costs)

IES Data available (NATA Lab test in Australia)

IP53 Rating

Comes in Daylight White and Cool White colours

LED TUBES : View Datasheet

FLEXIBLE STRIP LED LIGHTS

Flexible LED Light Strips for soft lighting and for interior décor

Tenrod offers a series of Flexible LED lighting products to suit various requirements and situations. For soft lighting, warm white or white flexible strips can be mounted in ceiling coves or under surfaces of cupboards or furniture using the self-adhesive mounting tapes. For ambient effects the RGB varying colour strips with remote wireless control can be set to operate with any fixed or varying colours, with or without special effects; brightness and on/off to give an enhancing effect to the room.

All Sealed extra tough LED Strip, sealed for handling and loaded with 60 LEDs per metre for high intensity as cove lighting as well as backlighting of shelves and light boxes. the strips are supplied with self-adhesive tape on the underside.
Outdoor Use Flexible Lighting are protected in a UV resistant tube against the weather. Loaded with 48 RGD LEDs per metre length, the strip provide a high intensity light in various colours.
CHASERLEDs Flexible Strips are equipped with a driver IC to give a chaser effect with several variations. The RGB strip will emit light in various colours. It will grab your attention with its dazzling effect.
Non-Sealed Flexible LED Strips are good for concealed furniture. They are easy to configure to match the furniture's profile. The strips are supplied with self-adhesive tape on the underside.

LED Strips : View Datasheet

CONTROLLERS : View Datasheet

AlumLEDLights (24VDC Modular System)

Aluminium LED Light Bars Modular System Lighting

Tenrod's AlumLEDLight DC Modular Lights uses solid-state LED lighting transparently sealed in an aluminium section for a rigid mounting to provide lighting of various purposes.

The LEDs are sealed for protection against water and dirt. The rigid aluminium channel case enables rugged handling and firm mounting as well as for heat dissipation.

Warm white LEDs provide the warm and comfortable glow for shelf or showcase lighting.

For jewellery cases, shrouded edge versions are available to obscure the glare of the LED Lights to patrons.

Custom lengths and sizes can be arranged for bulk purchases.

Why is it better to use Tenrod's AlumLEDLights

Sealed in transparent envelope for protection from water & dirt
Rigid aluminium channel casing for firm but easy mounting
LED Solid-State lighting for energy saving
High efficiency and high brightness LEDs
No mercury; no lead; ROHS Compliant, no toxic spills
Long life - 50,000 hours life expectancy
DC powered for easy installation
Very lightweight construction
Shrouded version for Jewellery Cases
Available in Cool White & Daylight White

AlumLEDLights 24VDC Modular System :  View Datasheet

LED Modules String Lighting


LED Modules Strings comprises of LEDs encapsulated on to metal trays for protection and thermal management. The modules are connected together by wires into strings so that they can be mounted to match the profile of the object they are backlighting. They are excellent for channel letters silhouetting and also for light box illumination. They can be supplied White light or RGB multi-colours and can be remotely controlled using with dimmers or colour controllers.

Why use Tenrod's LED Modules String Lighting?

Flexible for spreading out into variously shaped surface areas
Sealed in transparent envelope to protect against water & dirt
Mounted in metal casing for heat dissipation and rigid protection
Excellent for channel lighting and light box backlighting
Also can be used for cove lighting
Self adhesive taping for easy mounting
LED lighting - no mercury
High efficiency & brightness LEDs; long life operation
All colours with RGB LEDs
White, Warm White
Remote controller for colour selection and effects available

LED Modules String Lighting : View Datasheet